New patio installation
Fresh layout from scratch, including excavation, base prep, forming, pour, and finish. Ideal for adding usable outdoor space where there is currently lawn or bare soil.
Serving Tampa, Florida & surrounding areas
Mon–Fri 8am–6pm Sat 9am–2pm
Concrete patio service in Tampa, Florida
Get a patio that drains right, holds up to Florida heat and summer storms, and looks clean at the edges. Concrete Tampa builds and replaces concrete patios with crisp layout, solid prep, and durable finishes.
🎁 Bonus Coupon Inside
Built around the property
A Tampa concrete patio should be more than a slab in the backyard. In Tampa, patios live through strong sun, heavy rain, and humid months that push moisture into soils. That means layout, base prep, and drainage details matter as much as the finish you see on day one.
Concrete Tampa installs new patios and replaces failing patios across Tampa, FL (33606 and nearby). We build around how you actually use the space: seating areas, grills, walk paths, pool access, side-yard gates, and transitions to existing slabs. You get a clear scope, straightforward scheduling, and a finished patio with clean lines.
If you are comparing crews, ask how they handle these basics: slope away from the home, base thickness and compaction, reinforcement approach, control joint layout to manage cracking, and how edges are formed so they do not crumble. Those are the items that separate a patio that stays tidy from one that starts breaking down around the perimeter.
Preparation supports the finish
Florida patios fail for predictable reasons: poor drainage, soft subgrade, thin edges, and random jointing. Our approach is practical and consistent.
We start with layout and elevations. If a patio is too flat, water sits on the surface and migrates toward the house. We plan slope so surface water moves away from foundations and door thresholds, then confirm elevations before concrete arrives.
Next is subgrade and base. The soil in the Tampa area can change from one yard to the next, and some backyards stay wetter than others. We remove unsuitable material where needed, add base material when the situation calls for it, and compact in lifts so the slab has support.
Then we form edges and plan joints. A patio needs straight forms, stable stakes, and consistent thickness, especially at the perimeter where people step and furniture legs concentrate load. Control joints are placed deliberately to help cracking occur in the joints instead of across the field of the patio.
Finally, we finish and cure for durability. Broom finishes are popular for traction. Stamped textures and colored options can give a higher-end look, but they still need correct timing and curing to avoid surface issues. We will recommend a finish based on sun exposure, use, and how much maintenance you want.
Choose the right patio scope
Fresh layout from scratch, including excavation, base prep, forming, pour, and finish. Ideal for adding usable outdoor space where there is currently lawn or bare soil.
If the current slab is cracked, uneven, or draining poorly, replacement lets you fix grade, edges, and elevation at doors instead of patching symptoms.
A clean, classic texture with good traction for everyday use. It works well for shaded patios and areas that see rain runoff.
Patterned finishes for a more decorative look. We plan joint placement and borders so the pattern reads clean and the slab still behaves correctly.
Integral color or topical color options can add contrast. We will talk through sun fade considerations and the maintenance level that fits your goals.
Where patios meet doors, walkways, or grade changes, we build the transition so it feels intentional and reduces trip points.
From yard visit to walkthrough
A clear sequence keeps layout, drainage, preparation, placement, finishing, and curing expectations organized.
We walk the yard, talk through how you want to use the patio, and confirm access for equipment and concrete delivery. We also look at where water goes today and where it should go after the patio is in.
You get a clear description of the patio size, shape, thickness assumptions, reinforcement approach, finish choice, and any demolition or haul-off included. This is where details like steps, borders, or tie-ins are confirmed.
We excavate to the planned depth, prepare subgrade, place and compact base as needed, then set forms and elevations. We plan control joints before the pour so there is no guessing later.
Concrete is placed and finished to the selected texture. Control joints are cut or tooled at the right time, and edges are finished clean so they resist chipping.
We review cure timing, foot-traffic and furniture timing, and any sealer recommendations based on the finish. Then we do a final walkthrough so you know what to expect as the concrete cures.
Plan the investment onsite
A concrete patio in Tampa typically ranges from about $10 to $25 per square foot for a straightforward broom-finished slab, while decorative stamped or colored work often runs $18 to $40+ per square foot depending on pattern and prep. Smaller patios can price higher per square foot because mobilization, forming, and finishing time stay similar.
Your final cost depends on demolition and haul-off, access to the backyard, excavation depth and base needs, slab thickness and reinforcement, shape complexity, steps or grade changes, and the finish system, including any sealer. Exact pricing is confirmed after a site visit and measured layout.
Finished patio details
Customer proof
“We replaced an older slab that always held puddles near the back door. The new patio drains the way it should and the edges look sharp. The crew kept the work area tidy and the finish came out even.
“We wanted a simple broom finish with a clean joint layout. They explained where the joints would go before the pour and it looks intentional, not random.
Answers before the site visit
Most concrete patio Tampa projects take 1 to 3 working days for prep, forming, and the pour, with additional cure time before heavy use. The schedule depends on demolition needs, access, weather, and finish type, since stamped work is more time-sensitive on pour day. We will give you a realistic timeline after we see the yard and confirm the layout.
Yes, concrete can crack, but good joint planning and proper base support help control where cracks occur. In Tampa, the bigger issues are inconsistent subgrade support and poor drainage, which can lead to movement and wider cracking. A well-planned control joint layout and stable edges usually make the slab look cleaner over time.
A broom finish is a common choice because it has traction when wet and is easy to maintain. Light texture helps reduce slipping compared with very smooth finishes, especially during summer rain. If you prefer stamped texture, we will talk through pattern depth and sealer choices so the surface is comfortable and practical.
You can get close, but exact color matching is rarely guaranteed because concrete color varies with mix, moisture, and curing conditions. We can help you choose a finish and joint style that complements existing concrete, and we can also discuss borders or texture choices that make the transition look planned rather than forced.
Clear movable items, plan for a clear path to the work area, and mark any known irrigation components you want protected. Backyard access matters in Tampa neighborhoods with tight side yards or gates, since it affects equipment choice and labor. We will confirm access and staging during the site visit so there is no confusion on install day.
Yes. Concrete Tampa works across the Tampa area, including neighborhoods where access and grading can vary a lot from one block to the next. Tell us where you are and what you want to build, and we will confirm availability and the next scheduling window.
Start with the yard
Share the size you have in mind and a few photos of the yard. Concrete Tampa will walk you through layout, finish options, drainage considerations, and a written scope before any work starts. You can also learn more about the team at Concrete Tampa Florida.